Heating magnetic stirrer mixing operation mode

Characteristics of heating magnetic stirrer:

1. Using an electric heating jacket for heating, it has the characteristics of large heating area, uniform heating, and fast temperature rise, with a temperature limit of 380 ℃.

2. Heat and stir 50-10000ml standard or non-standard reaction bottles.

3. Adopt German PAPST series DC brushless motor, with stable performance, low noise, long service life, and no spark generation.

4. The shell adopts a disposable flame retardant reinforced PBT injection molded shell, which is resistant to high temperature, corrosion, and good insulation performance.

5. The 5.30 ° inclined control panel is suitable for both sitting and standing perspectives.

6. Speed regulation, stable at low speeds, and strong at high speeds.

7. Digital display speed display function.

Adopt DC motor, low noise, stable speed regulation, fully enclosed heating plate can be used for auxiliary heating. The constant temperature magnetic stirrer can set the temperature and temperature display, and can be used for long-term heating. The digital display is intuitive and accurate. The stirrer made of polytetrafluoroethylene and magnetic steel is resistant to high temperature, abrasion, chemical corrosion, and magnetism. It can be mixed in an airtight container, making it ideal and convenient to use.

Operation method of heating magnetic stirrer: Place the machine flat, place the container containing the solution in the center of the workbench, and place a suitable stirrer in the container. (It must be sucked into the center. The flat bottom container uses a cylindrical stirrer, and the spherical container uses a spindle stirrer.) The machine can be started and operated. The container shall not be made of iron or magnetic related materials, and its bottom thickness shall not be greater than 10mm, and it shall be smooth. The stirring speed should be gradually accelerated from slow to fast, and accelerating too fast can easily cause the stirrer to escape. If the stirrer is not in the center of the container, first turn on the stirrer, let it idle for a moment, and then turn it off. The stirrer will automatically be sucked into the center.